墨菲床是一個受歡迎的床家具類型used in apartments or homes where space is limited. They are also known as wall beds or fold-down beds because when not in use, they are held in an upright position against the wall and fold-down for sleeping.
這些床的類型can really help to maximize floor space in a small room during the day when a bed is not needed or provide an occasional bed for visitors without permanently occupying space in the room. Understanding Murphy bed dimensions is important for planning your room and deciding whether you can comfortably fit one in your space.
在衡量墨菲床時，您將想考慮其緊湊且擴展的測量。必須了解您牆壁上的空間，以確保您有足夠的自由牆空間來容納它。
您還應該考慮到床的折疊測量，以確保房間足夠大，以便完全折疊出來。墨菲床的各種尺寸來適應標準床墊，包括雙胞胎，完整，女王和特大號床墊。
最常見的墨菲床是垂直墨菲床。這些是大多數人想象著折疊床的類型。垂直墨菲床，當處於關閉位置時，似乎將站在頭上，床的枕頭端通過鉸鏈連接到牆壁。
其他類型的墨菲床，不太受歡迎的是水平墨菲床。這些床沿著床的長度連接到牆壁上，因此當它處於折疊位置時，您將與您的身體垂直睡在牆上。在這裏，我們看看每種墨菲床的尺寸。
在本文中
垂直墨菲床
這些墨菲床在關閉位置時垂直定位在牆壁上，因此如果您有低天花板，則應采取特別的測量值，以確保安裝有足夠的空間。
您還應該牢記任何天花板風扇或低懸掛的天花板吊墜時，將床降至折疊位置時，正如這些所在的方式。查看墨菲床的尺寸及其相應的標準床墊尺寸，以了解哪種類型的墨菲床將在您的空間中工作。在折疊位置時，您應該理想地允許墨菲床的兩側至少30英寸的自由空間，以便讓您在床上自由移動。
Twin Mattress
當在牆壁上的關閉位置時，這種墨菲床的高度在82到87英寸之間，具體取決於您安裝的高度。它的寬度在43到46英寸之間，深度在18到21英寸之間。在折疊位置，您應該允許在80到82英寸之間的投影。這是床將占據在牆上連接到床腳的地方的空間量。
Full Mattress
一個帶有完整床墊的墨菲床將具有82到87英寸之間的封閉高度。寬度將在57到61英寸之間，深度在18到21英寸之間。投影將在80到82英寸之間。
女王床墊
This type of Murphy bed will have a closed height of between 87 and 89 inches, so it requires greater wall height than the twin and full-size Murphy beds. The width will range between 64 and 68 inches, while the depth will fall between 18 and 21 inches. You should allow for a projection in the range of 85 and 87 inches.
床床王
這家墨菲床不出所料，需要最大的牆壁空間。在關閉位置，它將達到89到92英寸之間的高度。寬度將在84到86英寸之間，深度在18到21英寸之間。投影將在85至87英寸的範圍內。
Horizontal Murphy Beds
這些墨菲床不一樣普遍垂直μrphy beds, but in some situations, they present a more functional solution to an extra sleeping space. These beds are joined to the wall along the length of the bed, so once in a folded down position, the bed is only accessible from one side- the side not fixed to the wall. These beds are great if you want a fold-down bed but have low ceilings because they don’t take up much vertical space on the wall.
Twin Mattress
When fixed in a closed position, this bed will have a height on the wall of between 45 and 48 inches. The width will be 80 to 85 inches and the depth 16 to 20 inches. The projection of a twin-size Murphy bed will be between 44 and 46 inches.
Full Mattress
In a closed position, this bed will reach between 62 and 64 inches high on the wall. The width will measure between 80 and 85 inches and the depth 16 to 20 inches. The projection will be 58 to 60 inches.
女王床墊
當靠近牆壁時，一張女王典型的墨氏床的高度在68到70英寸之間。寬度將落在85至90的範圍內，深度為16至20英寸。折疊時，這張床的投影將在65到68英寸之間。
床床王
A king-size Murphy bed will be between 68 and 70 inches high. The width will vary between 85 and 90 inches, and the depth 16 to 20 inches. The projection of this bed, when fully folded down, will be between 78 and 80 inches, so you’ll want to check the head height of light fittings to ensure it won’t hit them when opening and closing.
